Description
90 MM Billet Aluminum Throttle Body Fits 2011-2013 Mustang GT/ 2012-2013 Boss 302 with stock 80mm throttle body CFM Rating:1132cfm; with adapter 1101cfm (stock 80mm throttle body: 913cfm)* 4" diameter leading edge larger than stock throttle body - requires use of 4" ID silicone hose adapter or reducer 4" air inlet tube is recommended for maximum horsepower When using factory 3.5" diameter air inlet tube the molded rubber throttle body hose must be removed Ford Racing's performance electronic throttle bodies are for vehicles equipped with electronic throttle control (ETC) Includes jumper harness Does not include calibration, calibration required. All Ford Racing ETC throttle bodies feature: All factory sensors installed - no need to tear apart your original throttle body Calibrated for idle air flow using the same procedure as production throttle bodies The only throttle bodies backed by Ford Racing and features the Ford Racing logo CNC cut into the TB housing Precision billet construction with tapered inlet for consistent high flow Validation through hundreds of hours of dyno, racing, and street performance driving Polished aluminum for great looks Requires: Adapter: M-9474-M50 for OEM Mustang GT 5.0L 4V TiVCT intake Adapter: M-9474-M50B for Ford Racing Boss intake M-9424-M50BR Notes: Adapter M-9474-M50 rotates throttle body approximately 15 degrees counter clockwise Engine cover M-9680-M50 covers throttle body on 5.0L 4V Ti-VCT intake Boss intake M-9424-M50BR can be port matched to accept throttle body without adapter, requires custom gasket/RTV *All cfm ratings are calibrated at 28-inches of water, measured on SuperFlow SF-1020 Flow Bench.